2020 DOOSAN PUMA TT1800SY 5-Axis or More CNC Lathes | Prime Machinery
Overview
Type:
5-Axis or More CNC Lathes
Manufacturer:
DOOSAN
Model:
PUMA TT1800SY
Condition:
Used - Excellent
Year:
2020
Stock #:
68623
Status:
For Sale
Specifications

SWING OVER BED 9.05" MAX CUTTING DIAMETER 9.05" MAX CUTTING LENGTH 9.1" DISTANCE BETWEEN CENTERS 38.5" X-AXIS TRAVEL 6.5" Y-AXIS TRAVEL 3.93" Z-AXIS TRAVEL 27.5" C-AXIS INDEXING 600 RPM BAR CAPACITY 2.625" SPINDLE NOSE A2-6 SPINDLE MOTOR 30 hp SPINDLE SPEED 5,000 RPM RAPID TRAVERSE RATE - X-AXIS 787 in/min. RAPID TRAVERSE RATE - Y-AXIS 295 in/min. RAPID TRAVERSE RATE - Z-AXIS 1,575 in/min. SUB SPINDLE Yes SUB SPINDLE - BAR CAPACITY 2.625" SUB SPINDLE - SPINDLE NOSE A2-6 SUB SPINDLE - SPINDLE MOTOR 30 hp SUB SPINDLE - SPINDLE SPEED 5,000 RPM TURRET 2 - X-AXIS TRAVEL 7.5" TURRET 2 - Z-AXIS TRAVEL 28.3" TURRET CAPACITY (STATIONS) 12 TURRET TYPE BMT55 LIVE MILLING Yes LIVE MILLING SPEED 5,000 RPM LIVE MILLING MOTOR 7.5 hp TURRET 2 CAPACITY (STATIONS) 12 Y-AXIS Yes

Equipped With

FANUC OiTP CNC CONTROL W/DOOSAN EZ GUIDE i CONVERSATIONAL PROGRAMMING SET UP FOR UNLOADING OF PART THROUGH SUB HEADSTOCK (SEE BELOW UNLOADER FOR SEPARATE SALE) Y-AXIS ON UPPER TURRET FULL C-AXIS ON MAIN AND SUB-SPINDLES MISC LIVE AND STATIC HOLDERS PARTS CATCHER (MAIN) PROGRAMMABLE PARTS UNLOADER/CONVEYOR (SUB) TURBO REAR DISCHARGE CHIP CONVEYOR ($16,850 OPTION) 145 PSI COOLANT PUMS FOR UPPER AND LOWER TURRETS ($4,400 OPTION) EDGE TECHNOLOGIES REBEL 80SE SERVO BARLOADER ($24,800 OPTION) TOOL SETTER 3 COLOR TOWER LIGHT WAY LUBE OIL SKIMMER SOLID BOX WAY CONSTRUCTION ON HEAVY DUTY ONE-PIECE MEEHANITE CAST IRON BED ROYAL QG65 COMPACT COLLET CHUCKS ON BOTH LEFT AND RIGHT SIDE($8,000 OPTION) AUTO DOOR ($8,900 OPTION) AVAILABLE FOR SEPARATE SALE: EDGE TECHNOLOGIES REBEL 80 UNLOADER ($53,000 OPTION WITH BELOW EQUIP): - RIGHT SPINDLE LINER - EXTENDED TYPE - 2.380" DIA. - X-AXIS AXIAL SHIFT - (1) PUSHER LENGTH FOR PART VARIANCE W/RUBBER ID GRIPPER - EXTENDED V-TRAY TO REACH BACK OF RIGHT-SPINDLE - COOLANT PAN IN V-TRAY AREA FOR EXCESSIVE COOLANT - AIR BLOW TO REDUCE COOLANT AND CHIPS IN FINISHED PART - LADDER MODIFICATION AND SECONDARY BARFEED INTERFACE & E-STOP CIRCUIT HOURS OF MACHINE AS OF 3/3/2020: - UPPER: * RUN TIME; 127 HOURS * CUTTING TIME: 46 HOURS - LOWER * RUN TIME: 128 HOURS * CUTTING TIME: 22 HOURS ** MACHINE IS CURRENTLY IN PLANT, INSTALLED JANUARY 2021, BARELY USED ** TOTAL VALUE WHEN PURCHASED NEW: $353,000 ** AVAILABLE FOR IMMEDIATE INSPECTION & PURCHASE

DOOSAN PUMA TT1800SY CNC TURNING CENTER WITH SUB-SPINDLE & Y-AXIS - NEW: 2020

DOOSAN PUMA TT1800SY CNC TURNING CENTER WITH SUB-SPINDLE & Y-AXIS - NEW: 2020
5-Axis or More CNC Lathes