Doosan NHP 5000, New 2021, 220 Cutting Hours, 28.7" x 28.7" x 34.6", 15,000 RPM, Cat 40, 60 ATC, CTS,

CAPACITY:
X axis travel 730 mm (28.74")
Y axis travel 730 mm (28.74")
Z axis travel 880 mm (34.64")
Table loading area 500 mm x 500 mm (19.7" x 19.7")
Allowable table load 500 kg (1,100 lbs)
Maximum Part Diameter 800 mm (31.5")
Maximum Part Height (with no hydraulic interface) 1,000 mm (39.37")
Table Indexing 360,000 Degree Full B-Axis

MOTION:
X axis rapid traverse rate 60 m/min (2,362 ipm)
Y axis rapid traverse rate 60 m/min (2,362 ipm)
Z axis rapid traverse rate 60 m/min (2,362 ipm)
X\Y\Z axis acceleration 110\120\120 milliseconds (.9G\.8G\.8G)
Cutting feed rate 1 - 60,000 mm/min (.04 - 2,362 ipm)
Least command increment .001 mm (.0001")

SPINDLE:
Spindle nose to pallet center 100 mm - 980 mm (3.937" - 38.58")
Spindle center to pallet top 80 mm - 810 mm (3.15" - 31.88")
Big Plus Spindle System CAT 40 Big Plus
Spindle speed 15,000 rpm (Optional High Torque Spindle)
Spindle Motor 22/ 37 kW (30 / 50 hp)
Spindle Torque 303 nm (223.6 ft-lbs)

Construction: BED, COLUMN AND SADDLE:

The bed is one-piece casting made from fine grain Meehanite cast iron that provides
excellent rigidity, dampening and vibration absorbing characteristics. The bed has
a 3-point leveling system for ease of installation, leveling and maintenance.
The center through chip disposal trough allows swarf to flow freely to the back of
the machine for disposal. The box-type column casting is constructed from a special
GCD material that offers high rigidity and resistance to deformation under machining
loads. The step guide design reduces mass while increasing both speed and precision.