| X | 23.6" | 599.44 mm |
| Y | 22" | 558.8 mm |
| Z | 22" | 558.8 mm |
| Power | 25 hp | 18.6 kW |
| RPM | 12,000 RPM | 12,000 RPM |
| # ATC | 60 | 60 |
| Taper | Cat-40 | Cat-40 |
| Pallet-W | 15.75" | 400.05 mm |
| Pallet-L | 15.75" | 400.05 mm |
| # Axis | 4 | 4 |
| Max Table Load | 880 | 880 |
CAPACITY:
X axis travel 600 mm (23.6")
Y axis travel 560 mm (22.0")
Z axis travel 565 mm (22.2")
Table loading area 400 mm x 400 mm
(15.75" x 15.75")
Allowable table load 400 kg (880 lbs)
Maximum Part Diameter 600 mm (23.6")
Maximum Part Height 800 mm (31.5")
INDEXING TABLE AND PALLET CHANGER:
Indexing (Optional) Full B-Axis
B axis table positioning accuracy +/- 6"
B axis table repeatability +/- 4"
Changing method Rotary shuttle
Pallet change time 8 second
MOTION:
X axis rapid traverse rate 40 m/min (1,575 ipm)
Y Axis rapid traverse rate 40 m/min (1,575 ipm)
Z axis rapid traverse rate 40 m/min (1,575 ipm)
Cutting feed rate 1 - 40,000 mm/min (.04 - 1,575 ipm)
Least command increment .001 mm (.0001")
SPINDLE:
Spindle nose to pallet center 150 mm - 715 mm (5.9" - 28.1")
Spindle center to pallet top 50 mm - 610 mm (1.97" - 24.0")
Big plus Spindle system CAT 40 Big Plus
Spindle speed 12,000 rpm
Ac Spindle Motor (30 min. rating) 11 / 18.5 kW (15 / 25 hp)
Spindle Torque (30 min. rating) 117 nm (86 ft-lbs)
Spindle Acceleration \ Deceleration time 0 - 12k (5.19 sec) \ 12k - 0 (4.17 sec)
AUTOMATIC TOOL CHANGER:
Number of Tools 60
Tool Shank CAT 40
Pull Stud (Supply Company #) 711-23
Max. Tool Dia. \ Adjacent pots are empty 75 mm \ 140 mm (2.95" \ 5.5")
Max. Tool Length 300 mm (11.81")
Max. Tool Weight 10 kg (22 lbs)
Tool change time (tool to tool) 1.5 second
Tool change time (chip to chip) 4 second
GENERAL:
Machine Height 2,830 mm (111.5")
Floor Space Required (L x W) 4,803 mm x 2,290 mm (189.1" x 90.2")
Machine Weight 12,180 kg (26,796 lbs)
UTILITY:
Power required 68 kVA / 180 amps @ 220v
Voltage required - Fanuc 205-235 Volts / 3 Phase
Main Features
• Fanuc 0i-M Control with USB Port and 10.4" Color LCD Display
• Massive Meehanite cast iron bed
• Powerful, direct driven spindle design with oil chiller and (11 / 18.5 kW - 15 / 25 hp motor, 12,000 rpm)
• Spindle orientation, load meter, override and rigid tapping
• Automatic pallet changer with 2 tapped pallets (no center bushing). Pallet change time of 8 seconds
• High precision pallet location by 4, tapered conical pins and locked into position by 4 pull studs.
• Heavy duty table clamping by a hydraulic actuated curvic coupling. B - Axis version utilizes a hydraulic actuated rotary brake.
• Manual pallet rotation with locking pins every 90 degrees at the setup station, to aid in part changeover while machine is in operation
• Qualified edge locators to aid in setting up tombstones or fixtures
• Cam Type, Double Arm ATC (60 tools)
• Large Linear Roller Guides (X - 45 mm \ 1.772", Y - 45 mm \ 1.772", Z - 45 mm \ 1.772")
• Servo motors mounted directly to the oversized, double pre-tensioned ball screws (X - 40 mm \ 1.57", Y - 40 mm \ 1.57", Z - 40 mm \ 1.57")
• Fast rapid traverse rate (X - 40 m/min \ 1,575 ipm, Y - 40 m/min \ 1,575 ipm, Z - 40 m/min \ 1,575 ipm)
• AICC II (200 block look ahead)
• Renishaw probe ready (RMI-Q radio receiver, pop up box and GUI software only)
-- (Machine does not come with a part or tool probe. Can be purchased )
• Doosan Tool Load Monitoring and Adaptive Feedrate Control
• 20 bar (230 psi) Through spindle coolant, Air through spindle
• Flood coolant with large separate coolant tank and way oil skimmer (550 liter \ 145 gallon)
• Dual, screw type conveyors to guide chips to the rear of the machine for easy removal. Chip
• Full enclosure splash guard
• Telescopic covers
• Metered piston distributor lubrication
• Portable Manual pulse generator
MACHINE TO COME WITH 6 MONTH PARTS WARRANTY FROM DN SOLUTIONS (DOOSAN) ALONG WITH A BRAND NEW CHIP CONVEYOR
We use cookies to improve your experience. Privacy Policy.
We use different type of cookies to optimize your experience on our website. You may choose which type of cookies to allow and can change your preferences at any time. Remember that disabling cookies may affect your experience on the website. You can learn more about how we cookies by visiting our Privacy Policy.
These cookies are necessary to the core functionality our website and some of its features, such as access to secure areas.
These cookies are used to enhance the performance and functionality of our website but are nonessential. However, without these cookies, certain functionality may become unavailable.
These cookies gather information to help us understand site usage, measure marketing effectiveness, and personalize your experience.
These cookies enhance ad relevance, prevent repeat ads, ensure proper display, and sometimes tailor ads to your interests.
