CAPACITY:
Swing over bed 450 mm (17.71")
Maximum turning diameter 360 mm (14.17")
Maximum turning length 170 mm (6.69")
Height from floor to spindle nose 1,160 mm (45.67")
Distance between spindle center lines 460 mm (18.11"

SPINDLES:
Spindle speed 3,500 rpm
Spindle nose A2-6
Draw tube ID 52 mm (2.047")
Spindle bore diameter 61 mm (2.40")
AC spindle motor (15 min. rating) 18.5 kW (25 hp)
Maximum spindle torque (15 min. rating) 404 Nm (298 ft-lb)
Recommended chuck size 210 mm (8.26")
Recommended chuck through hole ID 52 mm (2.047"

C-AXIS:
Minimum programmable angle 0.001 degree
Rapid traverse rate 200 rpm
C-axis repeatability ±0.006 degree
C-axis positioning accuracy 0.0167 degree

BED, SADDLE & CROSS SLIDE:
X axis travel 190 mm (7.48")
Z axis travel 180 mm (7.08")
X axis guide way span 465 mm (18.3")
Z axis guide way span 480 mm (18.9")
X axis rapid traverse rate 24 m/min (945 ipm)
Z axis rapid traverse rate 24 m/min (945 ipm

SERVO TURRETS:
Number of tools per turret 10
Tool holder type BMT-55
Turning tool shank size (metric turret 25 mm) 1.0"
Boring bar diameter (metric turret 40 mm) 1.5"
Turret index time (next station swivel time) .16 second
Tool selection Bi-directional

GANTRY LOADER (Optional):
Work Capacity dia. x length, Max. 200 mm x 165 mm (7.87” x 6.5”)
Work Capacity dia. x length, Min. 50 mm x 15 mm (1.97” x .59”)
Work weight, max. 6 kg x 2 (13.2 lbs. x 2)
Standard loading time – flange work 7.9 seconds
X axis stroke (left-right), A1/A2 2,260 mm (90”)
X axis stroke (left-right), A3 4,120 mm (162.2”)
Y axis stroke (up-down) 710 mm (28”)
Z axis stroke (front-rear) 270 mm (10.62”)
Loading capacity (gripper and workpiece) 25 kg (55 lbs)
Speed, Max. (X/Y/Z axis) 150/130/50 m/min (5,905/5,118/1,968 IPM)
Servo motor power (X/Y/Z axis) 1.8kW/1.2kW/.5kW (2.34 HP/1.6 HP/.67 HP)
Wrist swivel angle 180 degrees
Swivel time 0.6 second
Jaw stroke – on diameter 20 mm (.79”)
Gripping force, max (each chuck) 2002 N (450 lbs)
WORK STOCKER (Optional):
Number of pallets (A1/A2) 14
Number of pallets (A3) 14 + 14
Location (A1/A2/A3) Left \ Right \ Left & Right
Number of lifting devices (A1/A2/A3) Twin \ Twin \ Single x 2
Allowable Work dia x length, min. 50-200 x 15 mm (1.96”-7.87”x .59”)
Allowable work loading (max,/pallet) 100 kg (220 lbs