1995 OKAMOTO OGM 12-24U

12" X 24" OKAMOTO MODEL: OGM-12-24U
UNIVERSAL I.D./O.D. CYLINDRICAL GRINDER
WITH FANUC 21GA CONTROL
NEW: 1995

SWING OVER TABLE ...................... 12.6"
DISTANCE BETWEEN CENTERS .............. 24"
GRINDING WHEEL SIZE ................... 14" X 1- 1/2" X 5"
GRINDING WHEEL SPEED (2) .............. 1,770/2,000 RPM
WHEELHEAD TOTAL STROKE ................ 11.8"
SWIVEL ANGLE .......................... +/- 30 DEGREES
AUTOMATIC INFEED (26 SETTINGS) ........ 0.00001" TO .002"
CONTINUOUS FEEDRATE (PLUNGE) .......... 0 TO 157" IPM
MANUAL PULSE FEED (3) ................. 0.00001", 0.0001"
&0.001"
WHEELHEAD RAPID RETRACT ............... 1.5"
RAPID FEEDRATE ........................ 157" IPM
GRIND FEED OVERIDE (0 TO 200%) ........ 157" IPM MAX.
MAXIMUM TABLE TRAVEL .................. 45.5"
SWIVEL ANGLE ......................... 2 DEG. TO -9 DEG.
TRAVERSE SPEED ........................ 0 TO 390" IPM
MANUAL PULSE FEED (3) ................. 0.00001", 0.0001",
& 0.001"
RAPID FEEDRATE ........................ 390" IPM
FEEDRATE OVERIDE (0 TO 200%) .......... MAX. 390" IPM
SPARKOUT .............................. 0 TO 10 PASSES
WORKHEAD SPINDLE TAPER ................ #4 MT
SWIVEL ANGLE .......................... +/- 30 DEGREES
WORKHEAD SPINDLE SPEEDS ............... 10 TO 500 RPM
TAILSTOCK SPINDLE CENTER .............. #4 MT
TAILSTOCK SPINDLE STROKE .............. 1.2"

APPROX. MACHINE WEIGHT ................ 7,700 LBS.
FANUC 21GA CONTROL:
-USER FRIENDLY CONTROL W/CRT DISPLAY (.00001" RESOLUTION)
POWERFUL TEACH FUNCTION
CHOICE OF GRINDING MODES:
PLUNGE GRINDING
INFEED @ LEFT-END, RIGHT-END, BOTH ENDS
SHIFT-PLUNGE/TRAVERSE GRINDING
MANUAL TRAVERSE GRINDING
-PROGRAMMABLE DRESSING W/DRESS COMPENSATION
-AUTOMATIC WHEELHEAD ADVANCE/RETRACT
-SIZE COMPENSATION
ALLOWS OPERATOR TO PROGRAM OFFSETS FOR SIZE ADJUSTMENTS
-DRESS INTERRUPT FUNCTION
ALLOWS FOR "DRESS ON DEMAND" IN BOTH ROUGH & FINISH GRIND
CYCLES.
-PROGRAMMABLE TAPER ADJUST
-MANUAL PULSE GENERATOR
-WORK JOG STANDARD
IDEAL FOR INDICATING WORKPIECE.
-PROGRAMMABLE INFEED SPEEDS
IN BOTH ROUGH& FINE GRIND CYCLES.
-PROGRAMMABLE GRINDING
OPERATOR CAN PROGRAM SHIFT-PLUNGE MODE FOR ROUGH GRIND,
THEN TRAVERSE MODE FOR FINE GRIND.
-HIGH RESOLUTION FANUC AC SERVO DRIVES
-BALL SCREWS FOR BOTH TABLE & INFEED OF WHEELHEAD

EQUIPPED WITH:
SWING DOWN I.D. GRINDING ATTACHMENT WITHOUT I.D. GRINDING SPINDLE
COOLANT SYSTEM
MACHINE IS PRESENTLY WIRED FOR 220 VOLT

** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE **
** EXCELLENT CONDITION - RUNS VERY WELL **