2012 OKUMA LB3000BBEX-MY

OKUMA SPACETURN LB3000BBEX-MY
CNC BIG BORE TURNING CENTER WITH MILLING & Y-AXIS
NEW: 9/12 WITH ONLY 1,560 CUTTING HOURS

SWING OVER BED........................ 22.83"
SWING OVER SADDLE..................... 18.5"
MAXIMUM MACHINING DIAMETER............ 16.14"
CHUCK DIAMETER........................ 12"
SPINDLE NOSE.......................... A2-8
SPINDLE SPEED RANGE (2 RANGES)........ 42 TO 4,200
SPINDLE BORE.......................... 3.58"
DRAWTUBE AND ACTUATOR CYLINDER ID..... 3.19"
MAIN SPINDLE MOTOR.................... 40 HP
X-AXIS TRAVEL......................... 10.24"
Z-AXIS TRAVEL......................... 41.93"
MAXIMUM WORK LENGTH................... 39.37"
Y-AXIS TRAVEL......................... 2.76"
C-AXIS INDEXING....................... 0.001 DEGREES
MILLING SPEED RANGE................... 45 TO 6,000 RPM
MILLING SPEED MOTOR................... 9.5 HP
TURRET................................ V12
TAILSTOCK CENTER...................... MT4
APPROXIMATE MACHINE SIZE: 131" LONG, 80" W
VOLTAGE: 220V/3/60

EQUIPPED WITH:
* OKUMA OSP-P200LS CNC CONTROL WITH ONE TOUCH IGF ADV
* ONE TOUCH IGF FOR M Y MACHINE HOBBING OPTION
* HELICAL FOR M Y SPINDLE SYNC TAPPING
* BALL SCREW DRIVEN PROGRAMMABLE TAILSTOCK WITH LIVE SLEEVE MT#4
* 12 POSITIONS TURRET ALL AVAILABLE FOR LIVE TOOLS
* MILL/DRILL/TAP
* SWING DOWN TOOL TOUCHSETTER
* CHIP CONVEYOR, SIDE DISCHARGE
* HIGH PRESSURE COOLANT
* 2 LIVE WTO HOLDERS, ONE STRAIGHT AND ONE RIGHT ANGLE THAT
HAVE ER32 COLLETS, FACE MILL AND A WELSON HOLDER. COLLETS GO
TO 13/16"
* TURNING TOOLS AND MANUALS
* BIG BORE OPTION WITH OPTIONAL 40 HP SPINDLE MOTOR
* SPINDLE SYNC TAPPING
* OFF CENTER TURNING

INSPECT UNDER POWER, SEE A VIDEO ON OUR WEB SITE
VERY LOW HOURS, EXCELLENT CONDITION