1985 SUMMIT

SWING OVER BED.......................... 39 1/2"
SWING OVER CROSS SLIDE.................. 28 3/4"
SWING OVER GAP.......................... 51 1/8"
LENGTH OF GAP........................... 25 5/8"
LENGTH OF GAP IN FRONT OF CHUCK......... 16"
LENGTH BETWEEN CENTERS.................. 120"
HOLE THRU SPINDLE....................... 12 3/8"
SPINDLE SPEEDS (VARIABLE IN 2 RANGES)... 4.5 TO 180 RPM
SPINDLE TYPE............................ A1-20
WIDTH OF BED............................ 25 5/8"
MAIN DRIVE MOTOR (220 VOLT)............. 20 HP
THREADS PER INCH - NUMBER/RANGE......... (42) 9/16 TO 64
METRIC THREADS -NUMBER/RANGE............ (36) .75 TO 64 mm
TAILSTOCK TRAVEL OF SPNDLE BARREL....... 14 3/8"
DIAMETER OF SPINDLE BARREL.............. 4 3/4"
APPROXIMAT MACHINE WEIGHT............... 27,000 LBS

EQUIPPED WITH:
* 33 3/8" 4-JAW CHUCKS FOR FRONT AND REAR OF HEADSTOCK
* TAPER ATTACHMENT
* STEADY REST - ROLLER TYPE, 2" TO 15 3/4" CAPACITY
* FOLLOW REST- 1 1/8" TO 11 13/16" CAPACITY
* HARDENED AND GROUND BEDWAYS
* QUICK CHANGE GEARBOX WILL CUT AMERICAN, METRIC AND MODULE THREADS
* 4-WAY RAPID TRAVERSE ON CARRIAGE
view a video of ths machine running by going to www.youtube.com/primemachinery