1994 EMCO MAIER 425

SIEMENS 810T CNC CONTROL WITH CRT

GENERAL INFORMATION:
TWO MAIN SPINDLE
TWO SYNCHRONIZED SUB-SPINDLES
FMB TURBO BAR FEEDER (NEW COST OF BAR FEED WAS $78,000)

WORK AREA:
SWING OVER THE CROSS-SLIDE:............ 6 3/8"
LONGITUDINAL TRAVEL(Z)................. 7.48"
CROSS TRAVEL (X)....................... 2.95"
SIZE OF WORKSPACE:.......................... 2.75"
MAIN SPINDLES:
SPINDLE NOSE (FLAT).................... 2.75"
SPINDLE O.D. IN FRONT BEARING.......... 2.36"
I.D. OF DRAW TUBE...................... 1.10"
SUB-SPINDLES:
SPINDLE NOSE (FLAT).................... 2.75"
SPINDLE O.D. IN FRONT BEARING.......... 2.36"
SEMI-THROUGH-HOLE W/CHUCK-COLLET
FOR DIA. (.98/1") DEPTH............. 3.93"
LONGITUDINAL TRAVEL (Z)................ 9.45'
RAPID TRAVERSE......................... 12M/MIN. (472 IPM)
MAIN DRIVE:
AC-MOTOR POWER:........................ 15 HP
MAX. TORQUE............................ 28 FT. LBS.
SPEED RANGE............................ 20-5000 RPM
FEED DRIVES, AC-MOTORS IN Z AND X AXES:
FEED FORCE (Z/X)....................... 675 LBS
RAPID TRAVERSE......................... 12/8 M/MIN (472/315 IPM)
ACCELERATION TIME FROM 0 TO RAPID...... 0.1 SEC.
TOOL SYSTEM (DATA FOR EACH TURRET):
NO OF TOOL STATIONS.................... 12
TOOL HOLDERS EMCO...................... EMCO VDI-16
INDEXING TIME FOR FIRST STATION........ .47 SEC
FOR EACH ADDITIONAL STATION:........... .17 SEC
CLAMPING SYSTEM MAIN SPINDLES; THROUGH HOLE
CLAMPING CYLINDER W/DRAW TUBE FOR BAR:. 1"
WORK HOLDING:
COLLET CHUCK FOR COLLETS TYPE 385 E/842/5C
WILL ACCOMADATE BAR MATERIAL:.......... .20" TO 1"
3-JAW POWER CHUCK...................... 3.75"
WITH THROUGH HOLE FOR BAR MATERIAL:.. .98"
FMB DOPPLETURBO 3800 BAR FEED AND LOADING SYSTEM
12 BARS / 3'
BAR DIAMETER: .20" - 1"
24 VDI HOLDERS
SPINDLE AND TURRET ALIGNMENT KIT
CHIP CONVEYOR

*** INSPECT IN MINT CONDITION UNDER POWER IN THE WEST ***