| Swing | 16" |
| Centers | 60" |
| Spindle Bore | 2.06" |
| Power | 10 hp |
| RPM | 2,000 RPM |
| Swing Over Cross Slide | 10" |
SPECIFICATIONS:
MAXIMUM SWING OVER BED WAYS ........... 16"
MAXIMUM SWING OVER CROSS SLIDE ........ 10"
DISTANCE BETWEEN CENTERS .............. 60"
BED WIDTH ............................. 11"
HOLE THROUGH SPINDLE .................. 2.06"
SPINDLE NOSE, CAMLOCK, SIZE ........... D1-6
SPINDLE SPEEDS (18) ................... 40 TO 2,000 RPM
FEEDS, LONGITUDINAL ................... .0015 TO .053 IPR
THREAD RANGE, INCH .................... 2 TO 72 TPI
METRIC ........................... .2 TO 14 MM
TAILSTOCK QUILL DIAMETER .............. 2.44"
TAILSTOCK QUILL TRAVEL ................ 5"
TAPER IN TAILSTOCK QUILL .............. #4 MORSE
APPROXIMATE DIMENSIONS ................ 40"W x 104"L
APPROXIMATE WEIGHT .................... 4,200 LBS
EQUIPPED WITH:
- INCH & METRIC THREADING CAPABILITY
- 9-3/4" FOUR-JAW CHUCK
- 9-1/2" THREE-JAW CHUCK
- THREADING DIAL
- HEADSTOCK ADAPTER SLEEVE WITH DEAD CENTER
- COOLANT SYSTEM W/ FULL LENGTH REAR SPLASH GUARD
- 10 HORSE POWER SPINDLE DRIVE MOTOR
INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE
