Mazak Integrex I-100 Bartac-s, 20.87″ Swing, 8″ Chuck Main, 6″ Sub, 5-axis, 4″ Bore, 2014 – Stock number: 64261

Equipment Details

 

Stock number: 64261

Mazak Integrex I-100 Bartac-S
CNC Multi Axis Turning/Milling Center With 4″ Spindle Bore
New: 11/2014 –  Low Hour Machine

Capacity:
Max Swing / Swing Over Cross Slide…….. 20.87
Maximum Machining Diameter (Upper Turret). 19.69″
Maximum Machining Length……………… 33.62″
Spindle Bore / Bar Work Capacity………. 4.41″ / 4.02″

Travel:
X-Axis Travel……………………….. 17.72″
Z-Axis Travel……………………….. 35.59″
Y-Axis Travel……………………….. 8.27″

B-Axis Travel……………………….. -30 To 210 Degrees

Main Spindle:
Chuck Size………………………….. 8″
Spindle Speed……………………….. 2,000 Rpm
Spindle Nose………………………… A2-8
Minimum Spindle Indexing Increment (C-Axis) 0.0001 Degrees
Spindle Bore………………………… 4.41″
Spindle Motor……………………….. 15 Hp

Sub Spindle: (Second Spindle)
Chuck Size………………………….. 6″
Second Spindle Speeds………………… 6,000 Rpm
Second Spindle Travel (W-Axis)………… 35.55″
Spindle Nose………………………… A2-5
Spindle Bore………………………… 2.4″
Minimum Spindle Indexing Increment (C-Axis) 0.0001 Degrees
Spindle Motor……………………….. 15 Hp

Milling Spindle: (B-Axis)
Milling Spindle Type – Single Spindle Turret With Atc
Milling Spindle Speed………………… 12,000 Rpm
Max Milling Spindle Torque……………. 49.3 Nm (36.4 Ft Lbs)
B-Axis Min Indexing Increment…………. 0.0001 Degrees
Tool Storage Capacity………………… 72 Positions
Tool Shank………………………….. Capto
Spindle Motor……………………….. 10 Hp

Machine Size And Power Requirements
Machine Floor Space (Not Including Bar Feeder): 127″ X 98″
Machine Weight: 23,500 Lbs
Required Power Capacity: 39.3 Kva

Equipped With:
– Mazak Mazatrol Matrix 2 CNC Control With:
– Eia/Isa – 3-D Coordinate Conversion – G00 Slope Constant
– Shape Compensation – Cylindrical (G07) – Polar (G12)
– Milling Spindle Sync – Cardbus (2 Slot) – Lan Port – Usb
– Thru Coolant, 213 Psi
– Work Unloading Unit Over Second Spindle
– LNS Quick Load Servo Iii Short Magazine Bar Feeder
– Royal Rota-Rack Parts Catcher And Conveyor
– Mp-250 Tool Probe
– Programmable Chuck Pressure System
– Maximum Part Program Size 8 Mb
– Work Measuring System, Rmp 60
– Spindle Thru Air While Rotating
– Chip Conveyor
– 8″ 5-Jaw Chuck With 4.41″ Bore For Main Spindle
– 6″ 3-Jaw Chuck For Sub Spindle