SPINDLE CONSTRUCTION: HARDINGE SUPER-PRECISION PRELOADED
BALL BEARINGS.
SPINDLE NOSE....................... HARDINGE TAPERED
VARIABLE SPINDLE SPEEDS............ 125 - 3,000 RPM
HOLE THROUGH SPINDLE............... 1-1/4"
SPINDLE CAPACITY:
With Round 5C Collets........... 1-1/16"
With Hexagon 5C Collets......... 7/8"
With Square 5C Collets.......... 3/4"
With Step Chucks................ 1-1/16" to 6"
With Jaw Chucks................. 5"
With Expanding Collets.......... 3"
SWING OVER BED..................... 11"
SWING OVER CARRIAGE................ 9"
SWING OVER CROSS SLIDE............. 6"
DISTANCE BETWEEN CENTERS........... 18"
COMPOUND SLIDE TRAVEL.............. 3"
CARRIAGE POWER FEED RANGE.......... 5/16" - 7" IPM
CROSS SLIDE POWER FEED RANGE....... 3/16" - 4" IPM
TAILSTOCK SPINDLE DIAMETER......... 1-3/8"
TAILSTOCK SPINDLE TRAVEL........... 3-3/4"
INCH THREADING RANGE............... 11" TO 108"
METRIC THREADING RANGE............. 0.275 to 2.7 MM
APPROXIMATE DIMENSIONS............. 65"L x 28" x 58"H
APPROXIMATE WEIGHT................. 1,700 LBS.
- SUPER PRECISION ACCURACY
- INCH AND METRIC THREADING
- ACU-RITE TWO AXIS DIGITAL READOUT
- DUAL DIAL ON COMPOUND FOR READING IN INCH OR MILLIMETER
- FULL BEARING TAILSTOCK
- LEVER TYPE BALL BEARING 5C COLLET CLOSER
- 5" DIAMETER 3-JAW BUCK CHUCK
- 7" DIAMETER FACEPLATE
- JACOBS DRILL CHUCK FOR TAILSTOCK
- LIVE CENTER FOR TAILSTOCK
- ASSORTMENT OF 5C COLLETS
- SELF-CONTAINED COOLANT SYSTEM
- 1.5 HP MAIN MOTOR
INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE
CONDITION: **** SUPERB ****
