MAZAK DUALTURN 20 WITH GL-100 GANTRY, TWIN SPINDLE, TWIN TURRET, NEW 2015, STOCK #67207

Equipment Details

 

 

Stock Number 67207

Mazak Dual Turn 20 With Gl-100 Gantry
Twin Spindle Twin Turret Cnc Turning Center With Gantry Load/Unload Robot
New: 2015 ( Specifications Subject To Buyer Verification):Standard Chuck Size Diameter (L&R)……………….. 8″
Maximum Swing…………………………………… 12.6″
Standard Cutting Diameter……………………… 10″
Maximum Cutting Length For Chuckwork………. 5.91″Main Spindle (L&R)
Distance Between Spindle Faces:
     Max. (Both Heads @ Home Position)……. 49.21″
Spindle Nose……………………………………… A2-6
*Spindle Bore………………………………………. 2.4″*Left-Side Spindle Is Non-Thru Hole Chuck Package (No Bar Capacity)*Right-Side Spindle Is 2” Thru Hole CapacitySpindle Speed/Ranges………………………….. 35-4750 Rpm/1
Spindle Horsepower (Cont/30 Mins)………….. 15/20 A.C.
Spindle Torque (30 Min)………………………… 246 Ft.- Lbs

Turrets  (L&R)
Type Of Turrets………………………………….. Dodecagonal/Drum Non-
Lift
Tool Change Time (1 Step)…………………….. 0.5 Sec
Total No. Of Tools………………………………… 24 (12 X 2)
Tool Size:
Turning & Facing…………………………………. 1″ X 1″
Boring Bar Max. Dia……………………………… 1-1/2″
Tool Change Time (1 Step/6 Step)……………. 0.5 Sec/1.4 Sec

Axis Travel:
X-Axis (L&R)…………………………………… 9.06″
Z-Axis (L&R)…………………………………… 19.69″
Rapid Traverse:
X-Axis…………………………………………. 1200 Ipm
Z-Axis…………………………………………. 1300 Ipm

Machine Floor Space (W X L):
W/O Automation Or Bar Feeder, Etc……. 107″ X 159.3″
Machine Height………………………………….. 82.3″
Total Power Required (Machine Only)……….. 65 Kva
Note: Actual Machine Main Transformer Kva Rating Will Be Greater
Air Requirements………………………………… 71 Psi / 14 Cfm
Total Weight (For Machine Only)……………… 13,200 Lbs

Equipped With (Subject To Buyer Verification):
Mazatrol Pc-Fusion-Cnc 640T Control
Eia/Iso Option Package
Pcmcia Interface (2-Slot)
Usb Memory Drive
Network Interface (For Lan And Modem)
20Hp L&R / A2-6 Nose / Spindle Speed 4750 Rpm L&R
Automatic Tool Eye L&R
Relocation Device
Windows 2000 Operating System For Mazak Machine Control
Hi-Pressure Coolant System @ 213 Psi
Gl100F/Pitch-Feed Type 2/D3-Hand/Jaw-Ab
Rear Hinge Conveyor Extended Discharge

**8″ Non Thru Hole Chuck Left Spindle
**Microcentric Collet Chuck Pkg Cb65-Nd/A6 – Right Spindle