MAZAK INTEGREX I-100 BARTAC-S, MATRIX 2, 8″Chk,11/2014, 4″ BORE, ATC, SUB,B-AXIS – Our stock number: 64261


Download Catalog

Equipment Details

Our stock number: 64261

MAZAK INTEGREX i-100 BARTAC-S MULTI-AXIS CNC TURNING/MILLING CENTER W/ 4″ SPINDLE BORE

NEW: 11/2014 – LIKE NEW LOW HOUR MACHINEĀ 

CAPACITY:
MAX SWING / SWING OVER CROSS SLIDE…….. 20.87
MAXIMUM MACHINING DIAMETER…………………. 19.69″
MAXIMUM MACHINING LENGTH……………………… 33.62″
SPINDLE BORE / BAR WORK CAPACITY…………. 4.41″ / 4.02″

TRAVEL:
X-AXIS TRAVEL……………………….. 17.72″
Z-AXIS TRAVEL……………………….. 35.59″
Y-AXIS TRAVEL……………………….. 8.27″
X2 AXIS TRAVEL (LOWER TURRET)…………. 8.66″
Z2 AXIS TRAVEL (LOWER TURRET)…………. 35.55″
B-AXIS TRAVEL……………………….. -30 TO 210 DEGREES

MAIN SPINDLE:
CHUCK SIZE………………………….. 8″
SPINDLE SPEED……………………….. 2,000 RPM
SPINDLE NOSE………………………… A2-8
MINIMUM SPINDLE INDEXING INCREMENT (C-AXIS) 0.0001 DEGREES
SPINDLE BORE………………………… 4.41″
SPINDLE MOTOR……………………….. 15 HP

SUB SPINDLE: (SECOND SPINDLE)
CHUCK SIZE………………………….. 6″
SECOND SPINDLE SPEEDS………………… 6,000 RPM
SECOND SPINDLE TRAVEL (W-AXIS)………… 35.55″
SPINDLE NOSE………………………… A2-5
SPINDLE BORE………………………… 2.4″
MINIMUM SPINDLE INDEXING INCREMENT (C-AXIS) 0.0001 DEGREES
SPINDLE MOTOR……………………….. 15 HP

MILLING SPINDLE: (B-AXIS)
MILLING SPINDLE TYPE – SINGLE SPINDLE TURRET WITH ATC
MILLING SPINDLE SPEED………………… 12,000 RPM
MAX MILLING SPINDLE TORQUE……………. 49.3 Nm (36.4 FT LBS)
B-AXIS MIN INDEXING INCREMENT…………. 0.0001 DEGREES
TOOL STORAGE CAPACITY………………… 72 POSITIONS
TOOL SHANK………………………….. CAPTO
SPINDLE MOTOR……………………….. 10 HP

MACHINE SIZE AND POWER REQUIREMENTS
MACHINE FLOOR SPACE (NOT INCLUDING BAR FEEDER): 127″ X 98″
MACHINE WEIGHT: 23,500 LBS
REQUIRED POWER CAPACITY: 39.3 KVA

EQUIPPED WITH:
– MAZAK MAZATROL MATRIX 2 CNC CONTROL WITH:
– EIA/ISA – 3-D COORDINATE CONVERSION – G00 SLOPE CONSTANT
– SHAPE COMPENSATION – CYLINDRICAL (G07) – POLAR (G12)
– MILLING SPINDLE SYNC – CARDBUS (2 SLOT) – LAN PORT – USB
– THRU COOLANT, 213 PSI
– WORK UNLOADING UNIT OVER SECOND SPINDLE
– LNS QUICK LOAD SERVO III SHORT MAGAZINE BAR FEEDER
– ROYAL ROTA-RACK PARTS CATCHER AND CONVEYOR
– MP-250 TOOL PROBE
– PROGRAMMABLE CHUCK PRESSURE SYSTEM
– MAXIMUM PART PROGRAM SIZE 8MB
– WORK MEASURING SYSTEM, RMP60
– SPINDLE THRU AIR WHILE ROTATNG
– CHIP CONVEYOR

– 8″ 5-JAW CHUCK WITH 4.41″ BORE FOR MAIN SPINDLE

-6″ 3-JAW CHUCK FOR SUB SPINDLE

-ALL AVAILABLE CAPTO TOOL HOLDERS

 

INSPECT UNDER POWER IN NORTH EAST PLANT